Time to put the box together. First put the bottom of the box (top and bottom are identical at this point) onto a pair of saw horses. Place one of the two end pieces on the bottom . Resting it on the small lip that should be sticking out beyond the screw strip. It should fit flush to the screw strip and the outside of the plywood should be flush with the bottom. Next put one of the sides on. Screw it to the bottom and the end you just put on. Now you can put the other end on, and then the other side. You're done with the box
for now.
Note: Make sure and put plenty of screws everywhere. This helps to add strength and doesn't take much effort (assuming you're using a power screw driver. If you're not, this is your excuse to go buy one!).
|
